MASA MASA   Join the National Association of Rocketry Minnesota Rocketry Network
   

About MASA

Membership

  Join MASA

Events Schedule

News

Meetings

  Meeting Reports

Launches

  Launch Reports

Planet Newsletter

  Planet Online

Officers

  Volunteers

  Contacts

  Email List

Outreach

  Outreach Reports

Photo Gallery

Tech

Files -n- Forms

MASSY Awards

Open Contest

Links

 

   
Last updated: Aug 31, 2006
Site hosted courtesy of the
Minnesota Rocketry Network
Alan Estenson, Webmaster
 

August 2006 launch report (8/27/2006)

On Saturday, August 26th, MASA held its ninth launch of the year. The launch was held at the sod farm near Nowthen. 

The weather started out cool and foggy.  The fog lifted, the skies opened up, and the sun came out.  It turned into a beautiful and warm day with only a light breeze out of the NNW.

Thanks to everyone who served RSO/LCO duty.  Thanks to everyone who helped set up the range and stayed to help pack it away at the end of the day.  A HUGE thanks to Ted Cochran for bringing out all of his launch equipment for the range!

The Annual Great UFO Drag Race had 6 entrants this year.  The participants were: Mark Thell (Tri-F-O), Alan Estenson (Snitch), Russ Durkee (Quest UFO), Michael Wachholz (Snitch), Russ Durkee (classic Centuri UFO), and Eric Myers (UFO).

The Comanche-3 drag race had 5 entrants this year.  The participants were: Jim Myers (D12-0,C6-0, C6-5), Glen Overby (D12-0, C6-0, C6-7), Mark Thell (D12-0, C6-0, C6-7), Ken Jarosch (D12-0, C6-0, C6-7), and David Whitaker (D11-0, B6-0, A8-5).  All stages lit successfully.  All sustainers recovered successfully.  As far as I know, all 15 parts came back!

Carol Marple successfully earned her Level 1 High Power Certification when she flew her PML Black Brant VB on an H128 motor.  Congratulations!

A few of the flights:

MASA members - please send in your thoughts about the launch! 

Ted Cochran writes:

I arrived at around 8:30 and started setting up. It was quite foggy--visibility only a hundred yards or so, and we were ceiling-constrained until about 10:30 or so.

I flew a bunch of little rockets--Arcie II, RingHawk, Shuttle Columbia, UFFO, and enRanged. I also flew Quantum Leap on an I211 to H148. The "up" part was beautiful, as always. Staging was a bit late, but deployment was right on cue. Alas, Quantum Leap found a new way to keep the main chute from deploying, and it landed rather heavily at the edge of the cornfield, cracking a fin and a 54mm motor mount tube.  It's repairable, but I'm thinking of retiring it and putting the electronics into other projects. Anyone know of anyone that wants a patriotic-looking display rocket? :-)

There were a lot of big rockets put up--the weather was gorgeous; the winds were light, and the launch wasn't too crowded.  Glen and Dave, in particular, made good use of the away pad, and Carol Marple--well, let's let Carol tell her story!

Thanks to all of you who helped set up and tear down the equipment, and to those who did a shift as LCO/RSO.

Anyone with any good pics, please send them my way; I could use them for the Planet.

Buzz McDermott writes:

Had a wonderful time at the club launch today. Brought out my neighbor, Scott, and his 11 year old son Andy. This was only Andy's second time flying a model rocket. I gave him a Quest Big Betty to build, which he brought to the launch. Along with flying his Big Bette twice, Andy also prepped and flew my 'spool' rocket on a C6 and my prototype SLAT/s on a B6

I flew my Edmonds Deltie Thunder on an Aerotech E15 and the upper stage of an Estes Clipper on an E9. I also prepped and tried to fly my DG&A Predator on an Aerotech Econojet G35 for our last flight of an abbreviated trip to the launch (Andy had to get back). Unfortunately, the G35 CATOd on the pad. No damage to the rocket, just a split motor casing and ejected fuel grain. MESS report has been filed.

It was a short, but 'productive' launch for me. On the way back, all Andy could talk about was coming to the next launch, and Scott was talking about needing to buy some rocket kits and asking where to get motors. Andy went home with his Big Betty and my (now his) SL:AT/s, looking forward to the next launch.

A half dozen successful flights, no rockets lost or broken (flying or in transport) and a possible new rocketry convert for the club. Not a bad day at all.

Ken Jarosch writes:

Still trying to burn up a large supply of AP and in keeping with the UFO days I flew three of many saucers. I have great day if I can burn up 3 AP's.

I used my last old oxidized F24-7W(0) in the Stars & Stripe Original Saucer mostly to burn up the reload. No false starts this time.

I put a F12-3J(0) in SpaceShipEarth which is a lighter Delta Saucer.  This is my favorite reload for these light saucers with the predicted altitude of 400' and lots of trailing smoke.

Paul and I bought some mid 90's reloads from a man at the May MASA launch. They have the old style delay structure and the fuel grain forward in the E's and F's. I bought several F40-4,7W's for the saucers.
Saturday I used up one of the F40-7W(0) in Smilely, a 29 mm Delta Saucer. With a great take off, lots of smoke and noise, this is the best F for this saucer.

I opened a new (2003) pkg. of F24-4W intending to burn these up. I started with one in my modified Shadow. First igniter failed. On the second attempt I got a good flight only to watch the rocket fly into the
chute. Some how the chute tangled in one of the large fins. The rocket came into the wet soil and cored the sod. No damage at all to the rocket.

Next I flew the Broadsword which like the Shadow from the same era was designed for the Estes E-15. I use Aerotech here. I put the second F24-4W in the Broadsword for a nice flight. It windcocked a bit and the chute brought it back to the firing line.

Before we left I put my 90's leftover Comanche III up in the drag race. It was full up with D12-0, C6-0 and C6-7. I didn't expect to get it back. I found the 1st. stage and followed the line to the ditch. Yes of course. It was laying flat in the easterly ditch. Another MASA member fished it out for me. Very little internal water! Mean while Dave Whitaker found the second stage on the opposite side of the field.  Thanks Dave. I have all the parts back for next year.

Glen Overby writes:

Wow, what a nice day to fly rockets!

Friday night I packed my car with both of my Big Rockets, during which I realised that my easy-up wasn't going to fit. I considered putting a rocket on the roof rack, but ... well, America is kind of paranoid these days and I decided against it.

Saturday morning I called the FAA to activate the waiver then left for the field. When I got to the west side of the twin cities, I saw fog and low ceilings. Ugh! Not a good sign. I arrived around 9:15 and helped Ted with a couple of final set-up things, set up my pad on the mid pad row then went to work preping my flights.

I packed parachutes for both big rockets then opened up the motor, and waited for the fog to burn off. While waiting I preped a 5-fin scratchbuilt rocket with a D12-3. Even it had to wait for the for the fog to lift.

Around 11am the fog was gone and the clouds were breaking up, so I finished preparing my 1/3 scale Nike Smoke (6" tube, about 80" long - 11lbs without the motor). I bought the parts for this rocket in March, 2000 and this was it's first flight. The rocket lumbered off the pad and headed for apogee ever so slowly, while I was trying to count out the seconds to ejection.  The delay burned long and I was wondering if it was going to be the rocket's only flight, but the motor did work properly and the big parachute deployed and brought the rocket down gently on the field.

I flew my Comanche-3 in the drag race, but lost track of which one was mine so I followed one of them in my binoculars for a bit, until I got worried that I was looking close to the sun, so I lost it. I heard someone tracking one coming down to the west of the pads, and it turned out to be mine! A friend who came out to watch me crash stuff brought back my booster stages.  I have two 'ok' pictures of the drag race.

As the day drew to a close, I decided to fly my 4" IQSY Tomahawk on the other I285 I had bought. After Ted cleared the far pad, I prepared the motor and took the rocket to the pad. This was a much faster ascent than the Nike Smoke, but the delay over the top was even longer. The parachute brought it down in one of the rivers, and I ran over to see what I could save. Fortunately, the upper portion of the rocket -- the part that had the $$ altimeter -- was sitting on weeds, and was dry. The altimeter said 1,984' which is pretty close to what Rocksim predicted (the delay wasn't very close to the 12 seconds predicted). It doesn't look like the phenolic tubing sustained any long-term dammage.

My total for the day was:  1072 newton-seconds, 6 motors

A big THANKS to Ted Cochran for hauling out his launch gear: the crowd barrier (required by the FAA waiver, by the way), PA, launch controller and many of the launch pads.  Thanks to those who spent time on LCO duty.  Thanks to Alan for bringing his 'quad pod' and Black Sky rail.

Here are some of the pictures I took at the launch:
http://reality.sgiweb.org/overby/rockets/August2006m/index.html

John Carlson writes:

It was a great day for a launch, after the fog lifted. I was there only for a couple of hours before I had to leave for a family activity. I did get to launch a few rockets.

A new, yes I said new, not much I have is newer that 25 years, but I cloned the old Estes Renegade on a D12-5 a cloned Centuri Orion on a C6-3 and a very old Maxi Alpha on a D12-5, my almost 30 year old Estes V-2 on a B6-4 and my 25+ year old Estes Honest john, I even got to drag race the Honest John With Mark Thell's 25 year old Honest John, pretty cool. Thanks again for the guys that set up everything in the fog. I hope next month has as good weather.

The Details:

Full launch tally (in Adobe Acrobat PDF form, requires version 6 or newer of the Acrobat reader)

The totals were:  134 flights, 161 motors.  The cumulative total impulse was 4858 Ns with an average total impulse of 30.2 Ns.  The motor breakdown follows:

Type

# Burned

MicroMaxx 0

1/4A

0

1/2A

2

A

12

B

26

C

56

D

34

E

9

F

9

G

7
H 3

I

3

(Alan Estenson)

Back to Launch Reports